A human-powered modular tool station

Solarpunk is about being friendly to the environment, so I’ve been thinking a lot about areas where human power could be used instead of electricity. I drew up this (very) quick sketch of a modular table that could accept a wide range of tools. It’s based on the old treadle sewing machines, but I think it could also use more conventional bike parts and be pedal powered. I’m not sure what the advantages are of treadle vs pedal, so if anyone knows why the old sewing machines used that system instead I’d be very curious to know!

Sketch of a human-powered base for various tools. Loosely based on treadle-powered sewing machine tables.

A rough idea of a human-powered (treadle or pedal) modular system

Jim Hammer

Treadle sewing machine. The sewing machine folds out from the center of the table when needed.

Caleb Spears from Portal Bikes said that Portal was using a modified cottered bottom bracket spindle to drive the attachments for their system. I think using a similar setup would be beneficial when building the table since tools could then be interchangeable between both systems. Caleb mentioned that the Portal Bikes usually have one person pedaling and one person operating the tools. Having a PTO hookup on either the inside or outside of the table to allow one-person operation of smaller tools and two-person operation of larger mechanisms would be ideal.

Picture of a cottered bottom bracket spindle with a notch cut in the end. The notch allows for the attachment of various tools.

This is the spindle picture I was sent by Caleb at Portal Bikes

I think my next steps will be to make a mock-up of the system in LEGO to see if there are any obvious flaws with the idea. If you can find an old treadle base for a reasonable price, I think it would be a great starting point for a full-sized prototype.

gettheshot75

Treadle base with no top

Be sure to sound off in the comments if you’ve ever used a treadle sewing machine or any other kind of human-powered tools! Thanks for stopping by!


Photo credits:

  1. Jim Hammer: “Singer Sewing Machine” (CC-BY-SA 2.0 license)
  2. Caleb Spear: Picture of Portal Bikes PTO Spindle
  3. gettheshot75: “Treadle Sewing base” (CC-BY-SA 2.0 license)

One thought on “A human-powered modular tool station

  1. Pingback: LEGO Human-powered tool station | Solarpunk Station

Leave a Reply