Category Archives: Solarpunk

Symbiosis

Decentralization of power, both political and electrical, is one of the core tenets of solarpunk. As the meme says, we’ve had the technology to transition to a decentralized, clean economy for a long time. Centralization of political power controlled by centralized corporate interests has been the chief hurdle to climate action.

Symbiosis logo - it looks like a spindly sea creature (anenome?) with the word "symbiosis" written next to it

Symbiosis is a new grassroots organization in the United States dedicated to building direct democracy to address climate change and social inequities. As an offshoot of the Social Ecology Institute, the underlying philosophy of the movement is that the broken nature of human interaction has let to our broken environment.

In order to make a concerted effort against the established corporate and federal concentrations of power, Symbiosis is positioning itself as an umbrella organization to help coordinate action between municipalists, environmentalists, and post-capitalists across North America.

As has become increasingly apparent, single-issue action has been ineffective at moving the needle toward a climate solution. Only when we build a coalition of our allies can we challenge the status quo.

There is a congress in the works for September 2019 to bring everyone together to begin the work of building communities and systems for the post-capitalist future. For more information about Symbiosis, visit https://www.symbiosis-revolution.org/.


Disclaimer: I am involved with Symbiosis, but do not speak for them in any capacity. This is my interpretation of the group based on a short time of involvement.

Tidalpunk: Come Home to the Sea

Many think life on Earth started in the oceans, and while there is scientific debate on that front, there’s no denying that humans have been drawn to the water since before we built the first city on the banks of the Euphrates. With an estimated 80% of the world’s population living within 100 km (~60 mi) of a coastline, it’s no surprise that solarpunk has a sibling that brings this love of the water front and center – tidalpunk.

Tidalpunk takes the environmental consciousness and appropriate technology of solarpunk to the high seas. Sailing ships, autonomous seasteads, and cities flooded by the rising waters of climate change populate visions of a tidalpunk future. I suspect that due to the Moon’s influence on the tides, tidalpunk and lunarpunk will find some interesting synergies.

Return of the Sail

boat classic clouds cruise
Photo by Inge Wallumrød on Pexels.com

The shipping industry currently accounts for 2.3% of carbon emissions, and the industry is targeting a 50% reduction in emissions by 2050. Most cargo ships run on diesel now, but we once sailed the seas using the renewable power of the wind. While having a backup propulsion method available would be prudent, when the wind is blowing, cargo could move without the use of fossil fuels. Low Tech Magazine has written several articles about the potential of bringing back sailing ships as cargo vessels. Our current cargo fleet could even be retrofitted with tethered, kite-like sails.

Seasteading

An artificial island in a rough c-shape. It is covered in grass and has several berths for boats.
Proposed artificial Island in French Polynesia by Blue Frontiers

Seasteading covers a variety of concepts for humans to make their home in the sea. Proponents of seasteading point to overcrowding and a lack of social innovation on land as reasons to move seaward. Some projects that could be considered under this umbrella are Sealand, various underwater habitats, and aircraft carriers.

delta_printer_1-8419da34982ad3af20046088872ca1c7cedbd1d9abd347586fdab267be6a52a1
A member of Project Entropy demonstrating a delta-style 3D printer

Project Entropy is a solarpunk makerspace flotilla with the aim to address plastic waste in the ocean and convert it into useful objects. The self-described micronation is also experimenting with distributed governance while it expands the frontiers of distributed manufacturing. While the Seasteading Institute and Blue Frontiers have interesting visions of the future, Project Entropy is making it real right now. Another project already on the water is the Flipiflopi, a boat built entirely from plastic recovered from the ocean and roadsides in Kenya.

A muli-colored sailboat sits in shallow water just off a white, sandy beach. Many people are on the boat and the shore. A Kenyan flag flies high above the solar panel on the boat.
The Flipiflopi recycled boat

The SeaOrbiter science vessel is one of the most exciting projects happening in the space. Planned as a full-time, ocean-going science vessel, the SeaOrbiter will have on-board laboratories and allow extended observation of the ocean. Parts of the ship will be kept at higher pressure to allow scientists to dive more often than would be possible from a surface vessel due to decompression issues like the bends.

A profile view of the SeaOrbiter science vessel. It has a large mast which pokes 27 m above the waterline. Another 31 m of the vessel are below the waterline. The vessel has various living quarters, laboratories, and is powered by wind and solar.
A profile view of the SeaOrbiter

Flooded Cities

boat near to dock
Photo by Daniel Frank on Pexels.com

Venice is the most well known flooded city in the world, but rising seas will soon give the world a number of similar locales. Even Venice is preparing for rising floodwaters with the MOSE Project, a giant flood gate designed to mitigate the worst tides from the Adriatic. NOAA has built an Interactive Sea Level Rise Map to show what areas will be most impacted by different sea level rise scenarios. In the US, Miami is particularly vulnerable since it’s geology precludes a flood gate or wall system like MOSE.

Where to Start

If tidalpunk sounds like something you’d like to investigate further, here are some resources to check out:

Do you have any experiences with tidalpunk? Let us know below or send us a comment on Sunbeam City. Thanks for coming aboard!

Saving the world, one apple core at a time

20190120_215150

The compostable bag from our recycling center.

I don’t have a green thumb. I’m trying a garden again this year, but despite my grandparents cultivating a host of vegetables right next door to me growing up, it wasn’t ever something I really learned how to do. My fear of dirt and the outdoors as a child was a contributing factor.

One thing I’ve associated with gardening that I find extra intimidating is composting. This year, I’m going to give it a shot through the local recycling center. I picked up a little green bag when I was taking our recycling into the center, so I’ll be feeding it with food waste and plant clippings.

I really hate wasting food, but even I have my limits to how far past an expiration date I’m willing to eat something. As ILSR notes in “How Community Composting Disrupts Big Waste,” composting can create jobs, reduce food waste, and fight climate change.

Are you a composter? Do you compost at home or through your community?

The Upcycle — A Review

UpcycleCoverSpiral1-2

The Upcycle by William McDonough and Michael Braungart is the followup to Cradle to Cradle. Written in 2013, it brings a decade’s worth of new information and experience to the concept of Cradle to Cradle design thinking.

If you’re interested in the circular economy and can only read one book – this is it. There is a short section at the front that recaps the underlying principles of Cradle to Cradle systems in case you haven’t read the first book. While Cradle to Cradle was groundbreaking for the concept that we should design human industry to be a positive good for the environment, The Upcycle contains many more specific examples of projects where the authors were able to achieve these ends.

For example, in the book there is a story of Dan Juhl who pairs farmers with investors for building renewables on their land. The investors get a guaranteed return on their investment for ten years, and the energy generation equipment reverts to the farmers after this period. More renewables end up on the grid, and families get an additional source of income by owning the means of energy production.

The physical book itself is a nice counterpoint to the design of Cradle to Cradle. While Cradle to Cradle was designed to be reusable in technical nutrient cycles, The Upcycle is designed with biodegradable inks and paper so that it can become a biological nutrient again. One of the main ideas of Cradle to Cradle design is that things should be delineated into two separate nutrient streams: biological and technical. Wood, paper, and things of this nature can be reused as they would be in nature by returning to the land while technical materials like plastics and metals should be reclaimed for infinite technical cycles. Preventing the creation of “monstrous hybrids” is an important goal of the Cradle to Cradle design process. These materials are amalgamations of material that are difficult, if not impossible to separate and reuse. This is particularly harmful if the materials in these hybrids are toxic in nature. The book quotes McDonough, “Let’s put the filters in our heads and not at the end of pipes.”

The Upcycle is a breath of fresh air. McDonough and Braungart show how we can rethink the way we design everyday objects to fit into the constant cycles of Mother Nature and end the insanity of cradle-to-grave mentality. Cradle-to-Cradle design is definitely the way we should be thinking  when we design technologies and objects for our solarpunk future.

Do you use any Cradle to Cradle products in your life? What has your experience been? Let us know below!

Getting my hands dirty

Last Saturday, we decided to get our solarpunk gardener on and planted some herbs and flowers. We’re in Zone 7 here in Charlottesville, so we’re trying some snapdragons and petunias outside and starting a kitchen herb garden as well. Later on we’ll be starting some peppers.

20190221_170027_Richtone(HDR)

Getting dirty

The green germination trays were printed last year in a not-so-successful attempt at growing flowers, so hopefully we’ll have better luck this year. The white bags are wrapped around small plastic pots that go into a holder that is supposed to help the herbs not get over-watered. This is a particularly big concern here in Charlottesville as we’ve noticed everything molds quite quickly due to the humidity.

8 herb packets arranged in two rows and four columns. The herbs include basil, rosemary, oregano, parsley, cilantro, thyme, dill, and sage.

Herb packets

We had to stay away from some herbs since we have cats and not all are cat-safe. The ASPCA has a good database for plant toxicity for cats, dogs, and horses. Now that everything is planted all we have to do is wait.

20190223_205912

Everything in its place

Do you garden? Are there any plants that you love to grow?

Making it real…

As you may recall, I want to find ways to bring more practical solarpunk into my life and into the world. To that end, I purchased a Raspberry Pi 3 B+ kit made by Canakit. I’m hoping to explore some of the ideas I discussed regarding solarpunk phones and communications during the last few weeks. I’m not an electronics savant by any means, so we’ll see if my hobbyist level skills can cobble anything interesting together out of the kit.

Box containing a Raspberry Pi 3 B+ and breadboard for electronics experiments

On a related note, I also just ordered a new wifi-enabled wall switch to control the lights in our main living area. While that isn’t particularly solarpunk, I think reflashing the electronics to not be dependent on a third party service is. As sold, the switch requires downloading and using an app that sends data out to the web through servers owned by Samsung and then back to my apartment to control my lights. This is both creepy and seems silly since the lights are right above the voice assistant I’m using to control them. Why do I need servers hundreds of miles away involved in this conversation?

I’ve had good luck with the Sonoff-Tasmota firmware from GitHub for other smart home devices, and will be using the information from their wiki to attempt to reflash this new switch. Since it’s a totally different piece of equipment, I’m a little nervously optimistic about the results. If all goes well, the switch will only talk to my local network and the only connection to the outside world will be through Alexa.

Wifi-enabled smart switch with front cover removed. Green circuit board is exposed showing a TYWE3S wifi chip. Other components are hidden from view as they're on the back side of the board.

At some point, I’m hoping to switch to a more privacy-centric voice assistant like Mycroft or Snips, but getting all of my smart home devices other than my voice assistant to be local only should make the transition simpler once I do get that setup. The Raspberry Pi will be an important part of this transition as I’m hoping to begin testing Mycroft and/or Snips once I’ve gotten some of the basic input/output bits of the Pi figured out.

Raspberry Pi 3 B+ in transluscent plastic case

If all goes well, then I’ll try building a mobile voice assistant that can kick result data to a simple linked smartwatch like a Pebble. I sketched out a highly detailed schematic for your pleasure below.

Screen Shot 2019-02-21 at 3.19.46 PM

I’m not sure how hard the communication with a watch will be, but the first step will be getting the voice assistant going on the Raspberry Pi. After deciding which AI is better to work with then I’ll try adding battery power and watch communications.

What are some of the ways you are making solarpunk real? Let us know below!

Energy: A Human History – Review

jacket_1_rev-small

Energy: A Human History by Richard Rhodes chronicles the development of industrial power sources with a focus on the innovators and scientists who developed the technologies. Starting in Elizabethan England with none other than William Shakespeare, Rhodes weaves a compelling tale of the western world’s energy sources starting with the transition from wood to coal in 1600s Britain.

The book paints the picture of the industrialists we now love to hate as human beings with hopes, dreams, and failings. It can be hard to remember after so long that James Watt and Henry Ford were once actual, living beings, and that they had hoped to make the world a better place with their inventions.

Drawing from many primary sources, Rhodes has lifted many gems of what the people of the time found concerning about these new technologies. With references to coal as “the devil’s excrement,” and many other such epithets, one might wonder why such dirty fuels ever became predominant. As Rhodes points out in the book though, industrialization with coal and other fossil fuels led to a near doubling of human life span and a higher standard of living. Rhodes does devote a fair bit of the book to the work that various towns and nations did to combat the air quality problems associated with the use of fossil fuels to varying degrees of success.

Concerns were not just constrained to air quality. Safety of steam engines, locomotives, and automobiles were a great concern of the time. As to cars, we have definitely come out on the wrong end of that technology with many US cities being designed for cars instead of people, but some of the concerns for trains seem amusing now as this quote Rhodes found shows.

“What can be more palpably absurd and ridiculous,” asked a reviewer for London’s Quarterly Review who favored a plan for a railway to Woolwich, “than the prospect held out of locomotives traveling twice as fast as stagecoaches! We should as soon expect the people of Woolwich to suffer themselves to be fired off upon one of Congreve’s… rockets, as trust themselves to the mercy of such a machine going at such a rate… We trust that Parliament will, in all railways it may sanction, limit the speed to eight or nine miles an hour, which… is as great as can be ventured on with safety.”

If you are firmly anti-nuclear, the end of the book will not be to your liking. As a cautiously optimistic person regarding nuclear energy, I feel the author may be a bit nuke-happy. Many of his points in favor of nuclear base loads are legitimate, however. Current nuclear generation technologies have been shown by IPCC and NREL (National Renewable Energy Laboratory) analysts to have a carbon footprint similar to wind and solar. With many cities and states looking at 100% renewable commitments, including nuclear as a base load to counter the intermittency of renewable sources seems reasonable in geologically stable areas. Unfortunately, when states set “renewable” goals for their energy goals, they sometimes include waste incineration, which is both gross and bad for local air quality.

Beside its overly-western focus, the other main shortcoming of the book is its relatively light treatment of renewable technologies. There was very little regarding solar, hydro, and wind, and I’m not sure if geothermal was mentioned at all. I suspect that this was due to a desire of the author to focus on the technologies that were the primary drivers of industrialization. Regardless, I think this is a good treatment of the subject of modern industrial energy sources and the people who brought them to fruition.

Do you have any recommendations for other books about energy generation or transmission? Let us know below!

Solarpunk Phones Part 4: Magic

woman reading a book

Photo by Pixabay on Pexels.com

[This is Part 4 of a series of posts. Here are links to Part 1: Repair, Part 2: Decentralize, and Part 3: Design.]

Despite marketing jargon, I don’t think that we’ve yet reached the point where our technology is “magical.” A cave person might feel differently, but smartphones, computers, and televisions are clearly tools in my eye. There are a few exceptions, but I want devices that more elegantly flow with our lives instead of us molding our behavior around the device.

In stories, magic feels more like an extension of the being wielding the power. Even when the power source isn’t from within the individual, magic is still channeled through the magic user, so they must be in tune with it, but not consumed by it.

Technology that “just works” is a step in the right direction, since few things are as un-magical as having to reinstall drivers. I think we can go farther though. For me, at least, it’s easy to get lost in the technology itself and lose sight of the end goal of the tech. To be truly magical, I think the device and interface need to melt away so we can focus on the real reason we’re using it. At their core, smartphones are devices for communication. How do we make meaningful communication with those we care about easier?

color conceptual creativity education

Photo by Pixabay on Pexels.com

Take the pencil. As long as it’s sharp, most people don’t spend a lot of time worrying about how much it weighs or how thin it is. It gets the job done and you don’t have to think much about the object itself. There are certainly applications like art where the hardness of the graphite is an important consideration, but for the majority of situations, the pencil is incidental to the outcome of wanting words or doodles on the page. The pencil is an extraordinary piece of technology because it works so well that we pay it barely any heed.

A few devices approach this simplicity: e-readers, Pebble smartwatches, smartpens, the Beeline bike navigator, the Typified weather poster, voice assistants, and most calculators. Maybe I just don’t have the headspace for multi-function gadgets, but for me, the more functionality you cram into a device, the more unwieldy it becomes. Perhaps some brilliant UI/UX designer will come up with a way to make the multi-function nature of the smartphone more seamless, but as of now, I find smartphones to be amazing but kludgy.

The people working on the Skychaser solarpunk comic are doing a great job of thinking of magical technologies. You should definitely check them out if this is something that appeals to you.

https://www.tumblr.com/skychaser-comic/180866535428/just-a-silly-idea-i-had-glow-bugs-they-are

https://www.tumblr.com/skychaser-comic/176597574371/another-picture-for-the-mobile-typing-device-now

I don’t have the answers for finding the right balance of functionality and magic but wanted to explore some of the questions with you. Maybe you have some ideas of how to make technology a little more magical. If you do and want to share, please post something below!

Solarpunk Phones Part 3: Rethinking Design

[This is Part 3 of a series about solarpunk phones. Here are links to Part 1: Repair and Part 2: Decentralize.]

There are essentially two extremes to technological design: the all-in-one device or the single-tasker. Take, for example, the knife. There are lots of single purpose knives – paring, cleaver, steak, etc. There are also several different types of multi-function knives, the best known being the Swiss Army knife. Depending on what task you have at hand, you would select the best knife for the job. Out and about, sometimes the best way to go is to carry the Swiss Army knife, but since it’s a multi-function device, it isn’t usually the best tool for the job, even though a lot of the time it is pretty decent at several different things. Unfortunately, the more functions you cram into a Swiss Army knife, the less useful it becomes at any single task. There’s a certain break-even point where it just gets ridiculous.

Image shows 8 Swiss Army knives from left to right with an increasinly large number of functions.

Victorinox pocket knives by quattroman76 under a CC BY-ND 2.0

While smartphones can do a great many things, since they aren’t really designed to do one specific task, they end up sacrificing the ability to do any one thing really well. I wonder if we’ve lost something by trying to unify all of our devices. Our mobile technology has become a monoculture compared to the wide variety of form factors of phones before a single slate of glass became the norm.

Before the consolidation of iPhone-esque design hit the scene, some people thought the future would be a cloud of wearable devices, the Personal Area Network (PAN). While carrying a number of single-focus gadgets on a common network may not be the best solution for everyone, it could be game changing for some. Also, broader acceptance of PANs might lead to more innovation in the smartphone space with regards to form factor. While there are rumblings of foldable phones, I can’t help but think those are merely an evolution of the current iPhone-centric design school.

Random sketches I made of different hubs/accessories for a PAN-based device

Modular, open source electronics architectures would be a step in the right direction, allowing designers to select off-the-shelf components for inclusion in many different types of devices. The closest things I’ve seen on the market would be the Fairphone, which we’ve mentioned before, and the RePhone Kit, which is an Arduino-compatible phone kit from Seeed Studio. It’s a neat little phone hacking platform that lets people build their own phones. Unfortunately, Rephone is only 2G data capable, meaning no data connection in the US. Motorola gets an honorable mention for the Moto-mods system that lets you add different features to your phone through a special port on the back of their Z-series phones.

Of course it isn’t solarpunk if we aren’t designing with the impact of the device in mind from the beginning. Dominic Muren’s  Skin, Skeleton, and Guts model for product design is one approach to this design problem. When coupled with the Cradle to Cradle idea of separate biological and technical nutrient cycles, I can imagine future devices where the skin of the device is a compostable fabric that can be changed to suit the style of the user, while the metal skeleton and modular, electronic “guts” could be reused in further technical cycles.

TL;DR

In short, when approaching the design of a solarpunk phone, I would want modular components to be at the core to allow for more diversity of form factors like there once was in the mobile space. Also, devices should be designed for the circular economy using safe and reusable/recyclable materials.

Do you have any ideas for what should go into a solarpunk smarphone? Would a PAN be too cumbersome, or do you find that the “Jack of all trades, master of none” nature of the smartphone isn’t worth the trade-offs? Let us know below!

Solarpunk Phones Part 2: Decentralize

antique broken cell phone communication

Photo by Pixabay on Pexels.com

[This is Part 2 of a series about solarpunk phones. Here’s a link to Part 1: Repair and Part 3: Design.]

Humans have an amazing capacity for cognitive dissonance. Even though we may know something is bad for us or has significant negative consequences, we’ll still trudge ahead, even if the benefit to an action is small. As Steven Szpajda from This Week in Law is fond of saying, people will give up large amounts of privacy and security for a very small perceived benefit.

Solarpunk Druid had a recent post to this effect, “It’s the events stupid: Why FB is the hardest media to quit” discussing the titular quandary. As we have with fossil fuels, we’ve become reliant on systems whose existence is at cross-purposes with our own.

For this second part of my exploration of what a solarpunk communication device might look like, I want you to consider your relationship with your carrier and web service providers — Verizon, Facebook, etc.

antenna clouds equipment frequency

Photo by Pixabay on Pexels.com

Most of us have become comfortable, complacent even, with the idea that the companies that control our communications know everything about our habits. What might be surprising though, is that the information they collect isn’t just available to other multi-national megacorporations, but that private citizens can easily get access to the location of customers of at least AT&T, Sprint, and T-Mobile in the US.

Solarpunk, as a subgenre of speculative fiction is all about “what-if,” so what if we weren’t beholding to megacorps for our communications? What if we decentralized our cellphone and internet access? With the increasing presence of AI subservient to known bad actors, it’s time we start examining how to wean ourselves off of the corporations that feed our information addictions. While taking a break from technology can be beneficial for our mental well-being, I don’t think it’s practical to completely give it up either.

Solarpunk is also about making the “what-if” into a concrete reality, so what technologies exist to help us break free and decentralize our digital lives?

Mesh Networks

Mesh networking, which we’ve mentioned before, allows various parts of a network to communicate without a single central node, like a cellphone tower, controlling all of the traffic. If everyone in a given geographic area had a smartphone that worked on a mesh network, they wouldn’t need a carrier to contact their friends in that area. This has been touted as a potentially life-saving measure for natural disasters, and is also a powerful tool for people protesting authoritarian regimes. Mesh networks are still in the early stages of development, but they point toward a possibile future of decentralized communication where the users themselves are the network, not some centralized authority that could leave users in the dark either intentionally or because of a cyber attack. Some current implementations include the mesh network going up in Detroit, the Serval Project, GoTenna, and the Althea Mesh.

three person holding smartphones

Photo by rawpixel.com on Pexels.com

Leaving for greener social pastures

Between the shuttering of GeoCities a decade ago and recent major changes to Tumblr and Flikr, denizens of the internet have witnessed great swaths of the web be deleted at the whim of a single entity. At the same time, data breaches like Equifax and direct manipulation of users by Facebook and their partners has made it more clear than ever that you’re the product for these companies.

The Open Source Community has been experimenting with alternative social networks for some time, and with the W3C ActivityPub standard, we’re seeing the emergence of an interconnected, social media Fediverse. What’s really cool about the Fediverse is that people on different platforms can follow each other without having to sign up for a different network. If the current behemoths had started this way, then you could follow your friend on Twitter from your Facebook account without having a Twitter account yourself. Since these platforms are Open Source, anyone can start their own instance, so there are communities built up around common interests (like solarpunk) but you can still hang out online with your friends from a different instance. There are a number of different platforms modeled off existing networks like FB and Twitter, but I’m sure we’ll see new concepts emerge as well. There are even some beta plugins to allow WordPress websites to be federated with ActivityPub, so maybe you’ll see Solarpunk Station in the Fediverse soon!

The Fediverse isn’t the only decentralized social networking solution out there either. Other clients like Scuttlebutt and Steemit have also cropped up in recent years. Scuttlebutt has a large solarpunk contingent already as seen in the partial graph of the network below, while Steemit skews heavily toward the cryptocurrency crowd as it is itself based on the blockchain. Scuttlebutt has some really cool features like being designed around intermittent connections. There’s a lot more information and a fun intro video on their website.

Have you tried any of these new social media sites or built a mesh network? Let us know how it went below!